Insert the included USB cable into a USB adapter (5V, not included) and plug it into the back of the clock. This ensures the LED display stays on constantly.
: This is a normal power-saving feature when the DT6507 is running on AAA batteries. To keep the display lit at all times, simply connect the clock to a continuous USB power source. The temperature seems inaccurate : Make sure the clock is not placed near a direct source of heat or cold drafts, like an air conditioner, heater, window, or under direct sunlight. It can take up to 30 minutes for the built-in thermometer to adjust to a new room's temperature. The alarm doesn't sound or is too quiet : First, ensure the alarm is activated and the alarm icon is showing on the display. Also, verify that the clock is not in a power-saving battery mode and is instead connected to USB power for maximum speaker volume. The time is wrong after a power loss : The AAA batteries act as a backup to your settings. If your clock loses power after a short time without batteries, simply replace the AAA batteries with a fresh set. If the time is still wrong, follow the "How to Set the Time and Date" guide above to correct it. The buttons are not responding : If the clock is not responding to button presses, press the small RESET button on the back of the device. You will likely need a paperclip or a similar small tool. This will restart the clock. You will then need to set the time and alarm again. dt6507 led mirror clock instructions
Set the end time for Night Mode (e.g., 06:00) using UP/DOWN, then press MODE to save. 6. Power Supply and "Screen Sleep" Feature Insert the included USB cable into a USB
The DT6507 is a tabletop alarm clock that uses an LED display on a sleek mirrored surface. It presents not just the time, but also a calendar and a built-in thermometer. The clock is known for its unique "mirror" effect, which makes the digital readout appear to float on a reflective surface when the display is active. To keep the display lit at all times,
Press or DOWN to adjust your snooze duration from 5 to 60 minutes.
Press or DOWN to choose between 12Hr (AM/PM) or 24Hr military time. Press MODE once to save and move to hour settings. 2. Set the Hour and Minutes
The digits will flash. Adjust with UP or DOWN , then press MODE .