Sscom V5.13.1 Download English [patched] -

| Issue | Possible Cause | Solution | | :--- | :--- | :--- | | | USB-to-Serial driver not installed or device not detected. | Install or reinstall the driver for your specific USB-to-Serial chip (e.g., CH340, FTDI). Check Device Manager for unknown devices. | | Can't open COM port | Port is in use by another program. | Close any other serial monitoring software or IDE that might have the port open. Reboot your computer to clear any hung processes. | | Received data is gibberish | Baud rate, data bits, stop bits, or parity do not match the device's settings. | Double-check and synchronize the communication parameters between SSCOM and your device. For embedded devices, 115200, 8N1 and 9600, 8N1 are common. | | Software crashes when USB is unplugged | This is an older bug fixed in V5.13.1. | Make sure you are using V5.13.1 . Always use the "Close Serial Port" button before disconnecting a USB-to-Serial adapter to avoid any issues. | | No data transmission/reception | Incorrect wiring or no data being sent by the device. | For direct device connections, ensure wiring is correct: TX to RX and RX to TX , and a common GND connection is established. Verify the device is actively transmitting data. |

Extract the archive to a dedicated folder (e.g., C:\EngineeringTools\Sscom513 ). Sscom V5.13.1 Download English

:

: While you are looking for V5.13.1, newer versions (such as V5.13.10) are often available which include bug fixes for high-baud rate stability and Windows 11 compatibility. Key Features | Issue | Possible Cause | Solution |