Wittmann Tempro Plus D 360 Manual Official

Running the pump without water will destroy the mechanical seal within 30 seconds.

Check plant water supply valve; verify inlet pressure meets minimum requirements. Pump is jammed or running against excessive backpressure. Wittmann Tempro Plus D 360 Manual

Verify the phase rotation. If the pump runs backward, the unit will trigger a "Flow Fault." 4. Common Troubleshooting Codes Symptom/Alarm Likely Cause Insufficient water in the internal tank. Check supply pressure and inlet filters. Flow Fault Blockage in mold or closed valve. Ensure all mold valves are open; check pump rotation. Safety thermostat tripped. Running the pump without water will destroy the

The rear panel contains clearly marked ports for various connections. Follow these steps sequentially: Verify the phase rotation

Check for leaks, monitor pressure, and check for error messages. Monthly: Clean the filter/strainer on the water inlet.

He knelt in front of the Tempro Plus. The manual interface was a symphony of switches: Main Switch, Pump Switch, Heater Switch. But the heart was the —a simple, rugged digital display with an arrow key and a set-point dial. No touchscreen. No Wi-Fi. Just man and machine.

The unit will automatically vent air from the internal loop. This prevents pump cavitation and dry-running the heating elements. 3. Controller Interface Navigation