Motomasterbatterycharger111567manual !!top!! Full

: 2A (For motorcycles, small powersports, or overnight maintenance)

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | Ammeter reads zero or very low when charging. | Poor connection to battery. | Clean clamps and battery terminals. Ensure clamps are making a good connection. | | | Battery is fully charged. | Check the voltage of the battery. | | | Battery is defective (shorted cell). | Have the battery tested/replaced. | | Charger won't charge. | Selector switch is in OFF position. | Turn switch to 2A or 6A. | | | AC outlet is dead. | Check fuse or circuit breaker. | | Ammeter reads very high and does not drop. | Battery is deeply discharged. | Allow more time; needle should drop slowly. | | | Manual charger left on too long. | This is normal for a manual charger but indicates you may have overcharged if the battery is hot. | motomasterbatterycharger111567manual full