If using Static, input an unused IP address that matches your gateway subnet (e.g., 192.168.1.50 ).
Modify essential network settings such as the Subnet Mask, Gateway, and DNS directly within the software. How to Download and Install cp plus camera ip finder software
: Open the tool. It will automatically scan the network for connected CP Plus devices. If using Static, input an unused IP address
Ensure your computer’s network interface card is on the same subnet as the camera network range. If your PC is 192.168.1.X and the camera defaults to 192.168.0.X , temporarily change your computer's static IP to match the camera network segment for initial programming. It will automatically scan the network for connected
A: It works on 99% of modern CP Plus IP cameras (Bullet, Dome, PTZ, Eyeball) and Hybrid NVRs. Very old analog converters (TVI/CVI) may not respond.
Are you setting up or troubleshooting an existing network ?
: Allows users to modify IP addresses, subnet masks, and gateways directly through the tool. Maintenance