Audiosonic Caa-09169 Clock Radio Manual Work -

Adjust the FM wire antenna on the back of the unit. Move the radio away from other electronic devices.

The clock can only be adjusted when the radio function is turned off (Standby Mode). Audiosonic Caa-09169 Clock Radio Manual WORK

: FM signals rely on the thin wire antenna extending from the back of the case. Unravel this wire completely and change its position to eliminate static. AM broadcasts utilize an internal directional antenna, meaning you must physically rotate the clock radio cabinet to maximize signal reception. Adjust the FM wire antenna on the back of the unit

The built-in dual-band tuner tracks both local AM (MW) and FM frequencies with high clarity. : FM signals rely on the thin wire

The display does not have a dimmer switch. In a pitch-black room, the red glow is intense. If you are sensitive to light while sleeping, this clock acts like a nightlight that you cannot turn off. While some users appreciate the ambient glow, others will find themselves draping a cloth over the face of the clock to get some shuteye.

Rotate the dial on the side of the unit to search for your desired radio station. Adjust the sound level using the VOLUME dial. To improve reception:

: Rotate the analog TUNING wheel slowly until your desired station comes in clearly. The display may briefly show the active frequency profile during adjustment.