Wireless Weather Station H10515 Dcf Manual Link [work] 🚀

After powering up both units, do not press any buttons. Place the console and the outdoor sensor close together (within 1-2 meters). The console will automatically start searching for the signal from the outdoor sensor. This process can take a few minutes. Once the outdoor temperature appears on the display, the link is successfully established.

Insert batteries (2x AA) into the transmitter first, then into the base station within 2 minutes to ensure they sync. Time Synchronization: The station automatically searches for the DCF-77 signal (radio mast icon) for up to 7 minutes after a restart. Manual Override: If the signal is weak, press and hold the wireless weather station h10515 dcf manual link

for approximately 3 seconds to activate or deactivate the manual radio signal search Manual Time Setting : If no signal is found, press and hold the MODE button After powering up both units, do not press any buttons

and uses a 433 MHz frequency for its external temperature sensor Quick Setup & DCF Settings Automatic Setup This process can take a few minutes