917-front Audio Not Connected -

You moved your HP motherboard into a standard aftermarket PC case. Proprietary HP motherboards use a non-standard audio pin layout, while standard cases use a generic HD Audio connector.

Check the cable for pinches and the motherboard header for bent pins. 2. Adjust BIOS Settings 917-front audio not connected

Alternatively, if your aftermarket case has loose single-pin connector wires, manually route the ground loop wire to the detection pin. You moved your HP motherboard into a standard

Some users bypass this by placing a jumper on the specific pins of the audio header to "trick" the motherboard into thinking a cable is present. Disable Warning: Disable Warning: Configuration or hardware issue (not a

Configuration or hardware issue (not a critical system failure).

Reinsert the battery, reconnect the power, and boot into the BIOS (press repeatedly on startup for HP systems). Select Load Setup Defaults , save changes, and exit. Step 3: Bypass the Error in Custom Case Modifications