Qidi X-pro Manual ~upd~ -

Tap on the screen. Hold the filament until you feel the internal gears grab it and push it out of the nozzle. Unloading Filament:

The QIDI Tech X-Pro Go to product viewer dialog for this item. qidi x-pro manual

Push the filament into the top hole of the extruder assembly while pressing down on the spring-loaded tension lever. Tap on the screen

The X-Pro relies on a manual three-point leveling system. Perfect bed leveling is the single most critical factor for achieving proper first-layer adhesion. [Back Center Knob] O O O [Front Left] [Front Right] The Leveling Process Push the filament into the top hole of

Check the belt tension on the X and Y axes. Pluck them like a guitar string; they should be taut but not overly rigid. Troubleshooting Common Issues Root Cause Nozzle Clogging Burnt filament or debris in the nozzle.

Wait for the printer to home all axes. The nozzle will move to the first leveling point.

Hang your filament spools on the rear holders and feed the strands through the guide tubes. On the touch screen, tap > Filament .