Mi A0101 Test Point New -

Check the Windows . Under the "Ports (COM & LPT)" drop-down menu, a new entry should appear. It will typically read:

| Traditional Unlock | New Test‑Point Unlock | |--------------------|----------------------| | Requires an (Mi Account, 7‑day waiting period) | Bypasses Mi Unlock entirely – works offline | | Needs fastboot mode (hold Volume‑Down + Power) | Works even when the bootloader is locked or the fastboot port is dead | | Limited to official firmware (no downgrades) | Enables downgrade, custom ROM, and kernel flashing on a locked device | | Incompatible with bricked devices (e.g., soft‑brick after a bad flash) | Can revive many soft‑bricked A0101 units because it accesses the eMMC directly | mi a0101 test point new

Check your PC's . Under the "Ports" or "Universal Serial Bus controllers" section, you should see a newly detected device listed as an NVIDIA USB Boot-recovery driver or APX Device . If it appears, you have successfully triggered the low-level flashing mode. How to Flash the Firmware Check the Windows

Insert your thin plastic pry tool into the seam between the glass screen frame and the colored glossy plastic back cover. Under the "Ports" or "Universal Serial Bus controllers"

They are typically isolated from the main ground shield but sit adjacent to the small flex ribbon cables. Step 3: Trigger EDL Mode