Two-stage pulling is typically used to create fine, sharp tips with reproducible tapers. BioMedical Instruments Preparation Turn on the Power Switch on the Mode-Selector Knob.
: Features a digital LED display for heater levels (0–100) and automated double-pull settings, which simplifies mass production compared to manual methods. narishige pc10 manual new
If you need a "set it and forget it" puller for routine patch-clamping, the Narishige PC-10 is an excellent investment. It strips away the unnecessary digital complexity of modern pullers and focuses on the physics of melting glass. Highly recommended for labs that value reliability over bells and whistles. Two-stage pulling is typically used to create fine,
Increase the Heater 1 setting or increase the Magnet strength. This keeps the glass fluid longer during the extension phase. If you need a "set it and forget
The process stops after an initial "softening" pull and then performs a second, more intense pull. This is essential for producing firm microelectrodes with the sharp tips (0.1µm to several µm) required for patch clamp experiments. 3. Setting Your Parameters
The heater softens the center of the glass tube. Gravity draws the lower clamp downward by a predetermined distance. This narrows the center of the capillary tube to a thin waist.